CPU

• Supports Intel® Pentium 4 / Celeron D processors in LGA775 package.
• Supports up to Pentium 4 5xx, 6xx(EM64T) and Celeron D 3xx sequence processor.
• Support Intel 04B and 04A processors.
• Supports Intel Hyper-Threading Technology.
• Supports Intel new technology "EIST".

Chipset  

• ATI® Radeon XPRESS 200 (RC410) Chipset
- FSB 800/533MHz
- Supports single channel DDR II 667/533 SDRAM
- Graphic integrated

• ATI® SB450 Chipset
- Supports dual channel native SATA controller up to 150MB/s with RAID 0 or RAID 1
- Integrated Hardware Sound Blaster/Direct Sound AC97 audio
- Ultra DMA 66/100/133 master mode PCI EIDE controller
- ACPI & PC2001 enhanced power management
- Supports USB2.0 up to 8 ports

Main Memory

• Supports single channel DDR2 533/667, using two 240-pin/1.8V DDR2 DIMMs.
• Supports a maximum memory size up to 2GB

NOTE: Memory support by MSI certified module only. For more detailed information on verified memory modules, please refer here.

Slots

• One PCI Express x 16 slot. (supports PCI Express Bus specification v1.0a compliant)
• One PCI Express x 1 slot. (supports PCI Express Bus specification v1.0a compliant)
• Two 32-bit v2.2 Master PCI bus slots. (support 3.3v/5v PCI bus interface)

On-Board IDE / SATA

• An IDE controller on the ATI® SB450 chipset provides IDE HDD/CDROM with PIO, Bus
  Master and Ultra DMA 66/100/133 operation modes
- Can connect up to 4 IDE devices

• Serial ATA/150 controller integrated by ATI® SB450
- Up ot 150MB/s transfer rate
- Can connect up to 4 serial ATA devices

Audio

• High Definition link controller integrated in SB450 chipset
• 8-channel/6-channel audio codec Realtek ALC880/ALC655
- Compliance with AC97 v2.3 Spec.
- Meets PC2001 audio performance requirement

LAN

• Realtek® RTL8100C or 8110SB LAN chipset
- Integrated Fast Ethernet MAC and PHY in one chip
- Supports 10Mb/s, 100Mb/s and 8110S supports up to 1000Mb/s.
- Compliance with PCI v2.2
- Supports ACPI Power Management

Realtek 8100C available in RC410M-L, RC410M-LA Realtek 8110SB available in RC410M-F, RC410M-FI

IEEE1394

• VIA® 6307 chipset
- Supports up to two 1394 ports. (Rear panel x1, pinheader x1)
- Transfer rate is up to 400Mbps

IEEE1394 function only available in RC410M-FI

Internal I/O Connectors

- ATX 24-Pin power connector
- 4-pin ATX 12V power connector
- CPU / System FAN connectors
- CD-In connector
- Front panel connector
- Front panel audio connector
- 1 x Floppy disk drive connector
- 4 x Serial ATA connectors
- 2 x ATA133 HD connectors
- 1 x IEEE 1394 connectors support additional 1 ports (Optional)
- 2 x USB 2.0 connector support additional 4 ports
- SPDIF-Out connector (Optional)
- TV-Out connector (Optional)
- Clear CMOS Jumper

Back Panel I/O Ports

- 1 x Parallel
- 1 x PS/2 Keyboard
- 1 x PS/2 Mouse
- 1 x VGA port
- 1 x Serial port
- 1 x 6 in 1 audio jack / 1 x 3 in 1 audio jack (Optional)
- 4 x USB 2.0
- 1 x IEEE1394 (Optional)
- 1 x RJ45 LAN Jack

BIOS

• The mainboard BIOS provides "Plug & Play" BIOS which detects the peripheral devices and
  expansion cards of the board automatically.
• The mainboard provides a Desktop Management Interface(DMI) function which records your
  mainboard specifications.
• Supports boot from LAN, USB Device 1.1 & 2.0, and SATA HDD.

Dimension

• 24.4cm(L) x 23.0cm(W) Micro-ATX Form Factor.

Mounting

• 6 mounting holes.